Showing posts with label Automotive and Parts. Show all posts
Showing posts with label Automotive and Parts. Show all posts

Wednesday, June 20, 2018

Case Brief: Riley v. Ford Motor Co.


I am trying to get back into blogging and catching up on some cases that have been decided in South Carolina over the last few years.  Today’s case is Riley v. Ford Motor Co., 414 S.C 185, 777 S.E.2d 824 (2015).  It is a defective door latch case where the decedent was thrown from a Ford F-150.  The substance of the case relates to (i) whether the trial judge should have granted a $600,000 additur to the verdict, and (ii) how to apply South Carolina’s setoff law.  There is no real analysis of products issues per se, but it is worth a read from a procedural standpoint.

FACTUAL BACKGROUND: Benjamin Riley was involved in an automobile accident in a Ford F-150 when another driver pulled out in front of him.  He swerved, collided anyway, and the impact caused the driver’s door of Riley’s pick-up to open.  Riley was ejected and died from his injuries.  414 S.C. at 189, 777 S.E.2d at 826.

PROCEDURE: Riley’s widow, as his Personal Representative (“Plaintiff’), filed survival and wrongful death claims against the opposing driver and Ford.  414 S.C. at 189, 777 S.E.2d at 827.  The case against Ford alleged a negligently designed door latch system that resulted in Riley’s ejection.  Plaintiff settled with the opposing driver for $25,000 and allocated $20,000 to the survival claim and $5,000 to the wrongful death claim.  The trial judge approved the settlement.  Id.

At trial, Plaintiff only submitted the wrongful death claim against Ford to the jury, and it returned a verdict for $300,000 in actual damages.  The jury found evidence of conduct to support punitive damages but declined to award them.  Id.

Plaintiff sought a new trial nisi additur (to add damages), which the trial court granted in the amount of $600,000.  This brought the total recovery to $900,000.  Id.  Ford filed post-trial motions for judgment notwithstanding the verdict and to offset the opposing driver’s settlement.  The trial judge denied these motions.  Id. at 190, 777 S.E.2d at 827.

Ford appealed and the South Carolina Court of Appeals reversed in Riley v. Ford Motor Co., 408 S.C. 1, 757 S.E.2d 422 (Ct. App. 2014).  It held the trial court erred in denying Ford’s motion for setoff and in granting Plaintiff’s motion for a new trial nisi additur.  It reinstated the jury’s $300,000 verdict.  It also held Ford was entitled to offset $20,000 against the jury’s verdict in the wrongful death action, as opposed to the $5,000 that the settling defendant agreed to allocate to that claim.  Id. at 190-91, 777 S.E.2d at 828. 

Plaintiff appealed to the South Carolina Supreme Court on both issues.

ISSUES: (1) Did the court of appeals err in reversing the trial court’s order granting a new trial nisi additur, i.e., because the trial court’s decision was an appropriate exercise of discretion and was supported? (2) Did the court of appeals err in reallocation of the underlying settlement and setoff of settlement proceeds?  414 S.C. at 192, 777 S.E.2d at 827-28. 

DISPOSITION: Reversed on both issues.  414 S.C. at 192, 777 S.E.2d at 827-28. 

RULES AND OPINION: The Court first addressed a motion by a party for a new trial based on a challenge that the verdict is either excessive or inadequate.  The rule with regard to this issue is that “’the trial judge must distinguish between awards that are merely unduly liberal or conservative and awards that are actuated by passion, caprice, or prejudice.’”  414 S.C. at 192, 777 S.E.2d at 828 (quoting Allstate Ins. Co. v. Durham, 314 S.C. 529, 530-31, 431 S.E.2d 557, 558 (1993)).  If it is the former, then the trial judge alone has the power to alter the verdict by granting of a new trial nisi.  If it is the latter, it is the duty of the trial court and the appellate court to set aside the verdict absolutely.  Id.  Although the trial judge has discretion, “compelling reasons” must be given to justify the trial court invading the jury’s province in this manner. Id. at 193, 777 S.E.2d at 829 (citing Bailey v. Peacock, 818 S.C. 13, 14, 455 S.E.2d 690, 691 (1995)). 

At trial, Plaintiff presented expert testimony to support economic damages of more than $228,000.  There were also so many witnesses to testify about non-economic damages that the trial judge ruled it became cumulative.  In short, substantial evidence supported the decedent was a wonderful human being.  Id.  The Court held the court of appeals ignored the abuse-of-discretion standard of review and focused on a de novo evaluation of whether there was sufficient justification for “invading the jury’s province.”  Id. at 194, 777 S.E.2d at 829.  The Court held this was error.  The trial court did not abuse its discretion in granting an additur of $600,000 based on the trial judge’s thorough recitation of the basis for his actions.  Id.  The Court also clarified that just because the jury awarded some amount of non-economic damages (over and above the $228,000 in actual damages) did not mean that nisi additur was not available.  “While the presence of some amount of noneconomic damages may be a factor mitigating against the granting of a new trial nisi additur, there is no categorical rule prohibiting a nisi additur where a jury verdict includes some measure of noneconomic damages.”  Id. at 194, 777 S.E.2d at 830. 

On the issue of setoff, “’[a] non-settling defendant is entitled to credit for the amount paid by another defendant who settles for the same cause of action.’”  Id. (quoting Rutland v. S.C. Dep’t of Transp., 400 S.C. 209, 216, 734 S.E.2d 142, 145 (2012)).  Allowing setoff prevents a double recovery.  The Court recounted the principle of setoff was codified as part of the South Carolina Contribution Among Tortfeasors Act at section 15-38-50(1).  Id.  However, “any ‘reduction in the judgment must be from a settlement for the same cause of action.’”  Id. at 196, 777 S.E.2d at 830 (quoting Hawkins v. Pathology Assocs. Of Greenville, P.A., 330 S.C. 92, 113, 498 S.E.2d 395, 407 (Ct. App. 1998)).  If there is more than one claim, this affects how much a non-settling defendant may be allowed to offset.  Id. 

The issue was whether the court of appeals erred in reapportioning the $25,000 settlement between the survival and wrongful death claims so as to increase the amount Ford could offset against the wrongful death verdict.  The Court found the court of appeals erred in reapportioning the settlement proceeds.  Id. at 196-97, 777 S.E.2d at 831.  It agreed with the approach of the Illinois Court of Appeals, which stated as follows:

A plaintiff who enters into a settlement with a defendant gains a position of control and acquires leverage in relation to a non-settling defendant. This posture is reflected in the plaintiff's ability to apportion the settlement proceeds in the manner most advantageous to it. Settlements are not designed to benefit non-settling third parties. They are instead created by the settling parties in the interests of these parties. If the position of a non-settling defendant is worsened by the terms of a settlement, this is the consequence of a refusal to settle. A defendant who fails to bargain is not rewarded with the privilege of fashioning and ultimately extracting a benefit from the decisions of those who do.
Id. at 197, 777 S.E.2d at 831 (quoting Lard v. AMI FM Ohio, Inc., 327 Ill. Dec. 273, 901 NE.2d at 1019 (2009).
 
The Court held the trial court-approved allocation was reasonable and should not have been disturbed.  Therefore, Ford was entitled to set off only the $5,000 the settlement agreement apportioned to the wrongful death claim, and not the $20,000 reapportioned by the court of appeals.  Id. at 198, 777 S.E.2d at 831. 

This post is subject to the DISCLAIMER AND TERMS OF USE of this website. 


Wednesday, August 7, 2013

Motion in Limine Order in Quinton v. Toyota Addresses Crashworthiness in Modern Era


Earlier this week, I blogged about a recent trial of a Toyota Camry rollover case, which resulted in a defense verdict on June 21, 2013.  Prior to the trial, the Court issued a pre-trial Order in response to a motion in limine filed by Plaintiff's counsel.  The Order can be found here, and it is worthy of further commentary because it addresses crashworthiness in South Carolina.  It also references recent case law in which our courts have hinted at moving toward the Restatement (Third) of Torts: Products Liability (1998).  So...let's take a closer look.

To re-cap, the general facts relating to Quinton v. Toyota Motor Corporation can be found in this post.  Generally, the case involved a rollover of a 2009 Toyota Camry that resulted in the death of the driver (and sole occupant).  As stated in the Order, Plaintiff brought the case under the crashworthiness doctrine because she alleged the air bag failed to deploy properly during the accident. (Order at 2).  As a result, she claimed "enhanced injury" when the accident occurred, resulting in the death of the driver.  (Id).  Therefore, prior to trial, Plaintiff moved to exclude all evidence related to causation or fault. 

The Court began by summarizing prior South Carolina case authority on the crashworthiness doctrine.  Quoting from the Fourth Circuit Court of Appeals decision in Jiminez v. Daimler Chrysler Corp., 269 F.3d 439, 452 (4th Cir. 2001), the Court noted that "'liability [in a crashworthiness case] is imposed not for defects that cause collisions but for defects that cause injuries after collisions occur.'"  (Order at 2) (quoting id.).  In Jiminez, the district court excluded evidence of causation in a crashworthiness case.  The defendant had argued that because South Carolina adopted comparative negligence, the driver's alleged negligence was relevant to a damages calculation.  In concluding that the district court committed no error, the Jiminez Court noted that South Carolina had not addressed the issue of whether causation was relevant in a a crashworthiness analysis, and there was a split of authority on the issue.  Although the Court was not certain what the rule would be in South Carolina, it could not conclude that the the district court had erred in light of the fact that -- under the crashworthiness doctrine -- the cause of the original accident was not relevant to proving a claim for enhanced injury.  (Order at 2-3). 

Since Jiminez, the Court recognized that South Carolina courts still have not directly addressed this issue.  The Court offered to certify the question to the South Carolina Supreme Court, but the parties declined.  Therefore, the Court tried to ascertain how South Carolina courts would rule on it.  (Order at 3).

The Court reviewed that Branham v. Ford Motor Co., 390 S.C. 203, 220, 701 S.E.2d 5, 14 (2010) "embraced the Restatement (Third) of Torts: Products Liability (1998)."  (Order at 3).  Noting this trend, the Court cited to the comments in Restatement (Third) section 16 and the notion that a plaintiff's fault in causing an action that causes defect-related increased harm is relevant to apportioning responsibility.  (Order at 3-4) (emphasis added).  The Court noted that Jiminez did not hold that South Carolina would not admit evidence of cause in a crashworthiness analysis.  Rather, Jiminez only concluded there was no error by the district court under then-existing South Carolina law.  (Order at 4).

Since Jiminez, the Court noted that South Carolina has adopted comparative negligence, and its Supreme Court cited Restatement (Third) and its comments with approval in Branham.  (Order at 5).  The Court also noted that a majority of jurisdictions that considered the issue have held that comparative negligence is appropriately considered in a crashworthiness case.   Finally, the Court cited to language in Jiminez's dissent to support that a jury has to assess behavior of both the plaintiff and the defendant in a crashworthiness case to determine causation. The Court also agreed that the evidence was relevant to the analysis and conclusions of the experts accident reconstruction.  (Id.). 

The Order continues to show what this blog has maintained in numerous posts: Branham was a "game changer" in South Carolina products liability law.  Whether it leads to a definitive adoption of the Restatement (Third) of Torts: Products Liability (1998) by the Legislature remains to be seen, although our Legislature also made those overtures during the last round of tort reform.  We'll see...

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.

Monday, August 5, 2013

Verdict Survey: 2009 Rollover of Toyota Camry in Aiken County



On June 21, 2013, a jury returned a defense verdict in a rollover case tried in United States District Court, Aiken Division.  The details of the case are set forth below.

Capsule Summary: On June 21, 2013, a jury returned a defense verdict in a case involving a fatal rollover event in a 2009 Toyota Camry.  The driver's personal representative for the estate brought a wrongful death suit against multiple defendants, alleging claims for strict products liability, breach of warranty, and negligence.

Case Information: Alacia C. Quinton as PR for the Estate of April Lynn Quinton, Plaintiff, v. Toyota Motor Corporation; Toyota Motor Sales U.S.A., Inc.; Toyota Motor Engineering and Manufacturing North America, Inc., Toyoda Gosei North America Corporation, Defendants, C/A No.: 1:10-cv-02187-JMC.

Date of Verdict: June 21, 2013

Venue: United States District Court, District of South Carolina, Aiken Division

Judge: The Honorable J. Michelle Childs

Factual Background: On October 14, 2009, April Lynn Quinton was driving a rented 2009 Toyota Camry in Aiken, South Carolina.  She lost control of the vehicle while driving north into a left-hand curve.  The car exited the road, struck an embankment, and rolled over several times before coming to rest on its wheels.  Ms. Quinton was partially ejected and suffered severed head injuries from which she never recovered.  She died on October 23, 2009.

Allegations and Procedure: Plaintiff filed a wrongful death and survival action against Defendants in the Aiken County Court of Common Pleas.  In the Complaint, Plaintiff asserted claims for strict products liability, breach of warranty, and negligence.  Plaintiff alleged the vehicle's roof structure and seat belt restraint system were defective generally.  Plaintiff also alleged that the supplemental restraint system, which involved certain airbag technology, was defectively designed.   More specifically, the 2009 Toyota Camry's supplemental restraint system included a curtain shield airbag ("CSA").  This system deploys above the vehicle's doors to protect a passenger's head from side impacts.  Plaintiff alleged that the vehicle lacked a rollover-activated curtain shield airbag ("RCSA").  This system, which was not included in the 2009 vehicle, has a rollover sensor that deploys the curtain shield airbags when it senses the car is rolling over.

Defendants removed the case to the United States District Court of the District of South Carolina, Aiken Division.  Defendants answered the Complaint and later filed a motion for summary judgment.  The Court granted the motion with regard to Plaintiff's claims relating to a defective roof and defective seat belt restraint system.  However, it denied summary judgment on Plaintiff's claim of a defectively designed supplemental restraint system.

At trial, the primary liability theory remaining and asserted by Plaintiff was the claim that the driver's side airbag failed to fully deploy.  Plaintiff alleged this failure was the result of a hole in the airbag during manufacture (i.e., manufacturing defect).  Defendants demonstrated that the hole found in the airbag post-accident was created during the severe four-roll rollover event as the bag was constrained and over-pressurized.  In addition, the defendants presented evidence of the Quality Assurance/Quality Control procedures followed a the non-party manufacturers. 

Experts: Plaintiff presented the following experts: Ron Kirk (accident reconstruction), Robert Bowser (airbag design), Richard Edwards (materials science), and Joe Burton (biomechanics).  Defendants presented the following experts: Geoff Germane (accident reconstruction), Bob Gratzinger (roof structure), Mike Klima (airbag design), Karen Balavich (airbag/materials science) and Catherine Corrigan (biomechanics).

Alleged Damages: Plaintiff asked for $5 million.

Result: After four hours of deliberation, the jury returned their verdict in favor of the defendants.

Miscellaneous: This case also involved some pre-trial motions, one of which was a motion in limine by Plaintiff to exclude all evidence related to accident causation or fault.  I will try to post the Court's Order on that motion later in the week, as it provides some interesting insight into our state's movement toward Restatement (Third) of Torts: Products Liability (1998) and crashworthiness.  Also, special thanks to my friends and former colleagues, Dick Willis and Angela Strickland, for calling this case to my attention.  Dick and Angela were on the defense trial team for this case.  They were also kind enough to present the case at our products liability breakout session at the South Carolina Defense Trial Attorneys Association Summer Meeting a couple of weeks ago.

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.

Thursday, March 28, 2013

New SC Products Liability Decision: Courtney v. Nissan Motor Co., Ltd

Yesterday, the South Carolina Court of Appeals issued a new products liability decision, Courtney v. Nissan Motor Co., Ltd., Opinion Number 5106.  There were some real procedural issues in this case at the trial court level that prompted appeals by both the plaintiff and Nissan.

FACTUAL BACKGROUND: Minor plaintiff ("Plaintiff") was riding in the backseat of a 2000 Nissan Xterra.  As Plaintiff's father made a left turn, the automobile was struck by an oncoming vehicle on the right side.  Upon impact, a part of the automobile's frame punctured the fuel tank, resulting in a fire that injured Plaintiff and her mother.

PROCEDURE:  Plaintiff filed suit against Nissan alleging strict liability, negligence, and breach of warranty based on a design defect theory.  The case was tried over nine days.  At the conclusion of evidence, the court denied Nissan's request to charge the jury on the necessity of proving feasible alternative design as an element of Plaintiff's case.  The parties and the trial court agreed to submit seven special interrogatories to the jury, but the interrogatory concerning proof of feasible alternative design was to be shown to the jury after any verdict for damages.  Nissan objected and requested that this interrogatory be submitted with the others.  The trial court denied the request.   

The trial court did not differentiate between the consumer expectations test and risk utility test during its general charge to the jury on what Plaintiff had to prove in a design defect case.  Although it later charge the jury on both tests, it omitted that Plaintiff had to prove a feasible design alternative pursuant to the risk-utility test.  Prior to sending the jury to deliberate, the trial court told the jury it would be answering one additional interrogatory after the verdict was returned that was "irrelevant" to the deliberations.

The jury rendered a verdict against Nissan for $2,375,000.  The court then posed the seventh interrogatory to the jury (i.e., whether Plaintiff had proved a feasible alternative design that would have prevented the injury).  The jury responded, "no." 

Nissan filed a post-trial motion for judgment notwithstanding the verdict ("JNOV"), or in the alternative, for a new trial.  Plaintiff filed a post-trial motion requesting the court disregard the jury's response to the seventh interrogatory.  Initially, the trial court denied both parties' motions.  However, three days later, the South Carolina Supreme Court issued its decision in Branham v. Ford Motor Co., 390 S.C. 203, 701 S.E.2d 5 (2010) in which it held that the risk-utility test was the exclusive test in a design defect case and required proof of feasible alternative design.  The trial court had a second hearing, and it denied Nissan's JNOV motion but granted the motion for a new trial.  Recognizing Branham, the trial court issued an order in which it concluded its decision not to charge the jury on proof of a feasible alternative design was reversible error and required the grant of a new trial.

ISSUES: Nissan appealed denial of its post-trial motion for judgment notwithstanding the verdict based on Plaintiff's failure to prove feasible alternative design.  Plaintiff also appealed the circuit court's decision to grant a new trial.  Plaintiff also claimed the circuit court erred in denying her motion to invalidate a special interrogatory in which the jury found Plaintiff failed to prove a feasible alternative design in her case against Nissan.

DISPOSITION: Affirmed by the South Carolina Court of Appeals.

RULES AND OPINION: The appellate court first addressed whether Branham applied retroactively to the instant case.  It reviewed Branham's facts and law and concluded that the South Carolina Supreme Court intended for Branham to have retroactive application.   Branham recognized no new right or cause of action; it only affirmed that the risk-utility test would be the exclusive test for design defect cases.  

Next, the appellate court held that the jury's post-verdict finding that Plaintiff failed to prove feasible alternative design did not entitled Nissan to JNOV.  Nissan pointed out evidence in the record that Plaintiff agreed to craft the special interrogatory specifically to address feasible alternative design issues.  Although the appellate court agreed, it cited to Erickson v. Jones St. Publishers, LLC, 368 S.C. 444, 480, 629 S.E. 2d 653, 672 (2006) for the principle that it is improper to submit factual issues to the jury in the form of non-binding "advisory interrogatories."  Accordingly, the appellate court found that the trial court's denial of the JNOV motion indicated neither the parties nor the trial court intended for the answer to the interrogatory to be dispositive on the issue of liability.  It also pointed out portions of the record to support that Plaintiff did not intend for the seventh interrogatory to impact liability. 

With regard to Plaintiff's cross appeal that the trial court erred in granting a new trial because the consumer expectations test was permissible at the time of decision, the appellate court pointed out it had already addressed this argument (i.e., Branham's retroactive application).  The appellate court also re-reviewed portions of Branham to highlight that the both the majority and dissent agreed that the risk-utility test was the proper test in a design defect case, and the appellate court did not believe the the majority or dissent expressly condoned use of the consumer expectations test at the time of the instant trial. 

Finally, Plaintiff argued that because the trial court charged on both the consumer expectations and risk-utility test, and the jury did not specify which theory it applied to determine liability, then the "two-issue rule" and the law of the case doctrine required reinstatement of the jury's verdict.  The appellate court disagreed that these doctrines applied.  Furthermore, Branham's holding made clear that the jury's verdict could not be supported by the consumer expectations test.  Although Nissan did not challenge the trial court's decision to incorporate the consumer expectations test into its jury charge, Branham had not been decided at the time and Nissan would not have had grounds to object.  Therefore, Nissan's failure to object did not require reinstatement.  The trial court's failure to properly instruct the jury was prejudicial to Nissan and required a new trial.

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.

Wednesday, October 10, 2012

Directed Verdict in Products Liability Trial!

On May 30, 2012, I tried a non-jury products liability case in the Lexington County Court of Common Pleas.  The case was smaller, but it had some interesting issues that are blogworthy.  I also received a directed verdict, which was a nice result for a good client.  Set forth below is a summary of the case.

FACTUAL BACKGROUND: The plaintiff was an individual who restored a 1950 Chevy Styleline Deluxe automobile.  (The car to the right is not the actual car, but looks pretty much the same).  After refurbishing the car himself, the plaintiff decided he wanted to paint it a “candy apple” red.  This is significant because “candy” jobs are not your typical automobile paint job.  They have multiple coats and steps, and the thickness of the paint is thicker than a regular paint job.  The plaintiff took the car to a body shop and spoke with someone about painting it.  Long story short, the painter painted the car once and found the paint was “lifting.”  This basically means the multiple layers of paint did not remain set.  The painter wiped all the paint off, started over, and saw the same thing happening again on the second paint job.  He spoke with the paint retailer about the problems with the paint, and the retailer recommended some additional steps.  After taking the additional steps, both the painter and the plaintiff were satisfied with the paint job.  The plaintiff took the car home and began to put the chrome back on himself.  While he was replacing the chrome, he found the paint was “soft” (as he described it); it began lifting again and curling around the chrome. 

PROCEDURE AND DISCOVERY: The plaintiff filed his lawsuit on November 23, 2010.  The Complaint alleged a products liability lawsuit against the paint manufacturer and retailer, including typical claims of strict liability, negligence, and breach of implied warranty of particular purpose.  The Complaint alleged every possible defect relating to the paint, but it was devoid of any allegation of negligence whatsoever against the painter.  The paint manufacturer was not properly served and was in default when I was retained to represent it.  I moved to set aside the default, and the court granted the motion based on the insufficiency of service of process. 

During discovery, we deposed the plaintiff, retailer, painter, and corporate representative for the manufacturer.  The plaintiff also named the painter as his expert witness, but he did not name any other expert with regard to paint manufacture or design.  If you follow this blog, you know I have blogged extensively about the necessity of expert witness testimony in a products liability case.  In a design defect case, South Carolina’s appellate courts have stated unequivocally that a plaintiff must provide expert testimony to sustain his burden of proof with regard to design defect.  

Recognizing the painter was not qualified to opine about paint chemistry or manufacturing process, I moved for summary judgment.  The basis of the motion was that if the court excluded the painter as an expert witness, then my client was entitled to summary judgment based on applicable South Carolina law.  The motion was denied, and the case was set for trial.  After attempting to resolve the case, we reached an impasse and decided to try the case. 

TRIAL: Plaintiff did not request a jury trial.  Therefore, on May 30, 2012 Judge Letitia Verdin presided over the one-day trial and heard testimony and argument.  The court heard testimony from the plaintiff and from his “expert,” the painter.  The court recognized the painter could not opine as to paint design or manufacture.  Therefore, the court limited his testimony to paint application and the steps he took to apply the paint at issue.  My cross examination of the plaintiff and his painter focused on the fact that this particular paint job requires certain steps, and discovery revealed that either (1) certain steps were not followed, or (2) they could not be accounted for by the painter or the plaintiff.  After testimony by the plaintiff and painter, the plaintiff rested his case.

At the directed verdict stage, I focused on the fact that res ipsa loquitor cannot serve as a basis for a products liability claim in South Carolina.  See, e.g., Watson v. Ford Motor Co., 389 S.C. 434, 452-53, 699 S.E.2d 169, 179 (2010) ("We also note that Respondents may not rely solely on the fact that an accident occurred to prove their products liability case under a negligence theory since South Carolina does not follow the doctrine of res ipsa loquitur.")).  In other words, there is substantial case law requiring that a plaintiff provide proof of defect (i.e., without speculating as to possible defects just because the product did not perform as intended). 

DISPOSITION:  After hearing the various motions, Judge Verdin granted a directed verdict for the paint manufacturer, but denied the retailer’s directed verdict motion.  The retailer opted not to present a defense, and Judge Verdin took his case under advisement.  She later decided in favor of the retailer, as well, and issued an Order on July 30, 2012 in which she rendered a defense verdict and dismissed the case in its entirety with prejudice.

GENERAL COMMENTS: I never understood why the painter was not named as a party in this case since he was the individual charged with actually applying the paint.  The application stage for this paint is critical because of the complexity of a candy paint job.  Be that as it may, the court recognized the evidentiary issues in this products liability case and issued a directed verdict because the plaintiff failed to sustain his burden of proof.

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.

Friday, March 16, 2012

Case Brief: Campbell v. Robbins Tire and Rubber Company, Inc.


Today's "Case Brief" is Campbell v. Robbins Tire and Rubber Co., Inc., 256 S.C. 230, 182 S.E.2d 73 (1971) and involves a plaintiff who was injured while inflating at tire.  The guy in the video clip is not a plaintiff...he's actually trying to pop the tire tube.  I find his facial expressions of anticipation pretty funny.

Campbell is relatively short case, and I like it because (one can argue) it supports the necessity of expert testimony in a products liability case in order to prove defect.  The mere fact that a product malfunctions does not demonstrate it was defective.  A plaintiff has to prove this critical element.  (Although not exactly the same, this also ties into the fact that South Carolina does not recognize the doctrine of res ipsa loquitor).

FACTUAL BACKGROUND:  Plaintiff purchased two tire tubes manufactured by Defendant.  256 S.C. at 231, 182 S.E.2d at 74.  He put one on his truck, and it exploded during inflation, causing him to be injured.  Id.

PROCEDURE: Plaintiff sued Defendant for negligence in failing to inspect the tube before putting it on the market, in manufacturing a defective tube with weak seams and rubber, and in failing to warn Plaintiff of the defect.  256 S.C. at 232, 182 S.E.2d at 74.  At trial, Plaintiff won a verdict for actual damages.  Id.  Defendant made the appropriate motions during trial for directed verdict and for judgment notwithstanding the verdict on grounds that there was no evidence of defect or actionable negligence.  Id.  These motions were denied, and Defendant appealed.  Id. 

ISSUE(S): Whether the trial court erred in denying Defendant's directed verdict and judgment notwithstanding the verdict motions. 

DISPOSITION: Yes, the trial court was in error.  256 S.C. at 234, 182 S.E.2d at 75.  Reversed and remanded.  Id.

RULES AND OPINION: The court noted that it "elementary" that for Plaintiff to recover, he has the burden of proving defect and that the defect proximately caused his injury.  256 S.C. at 232, 182 S.E.2d at 74. The record showed that Plaintiff testified he had been a service station operator for 15 years, and a large part of his job was repairing, servicing and mounting truck tires.  Id. at 233, 182 S.E.2d at 74.  He testified as to precisely how he went about inflating the tire, including an account of the amount of air pressure in the tire during inflation.  Id.  During this process, the tire exploded.  Id.

The court noted that although Plaintiff offered evidence of injury, there was no evidence going to the issue of defect.  Id. at 233-34, 182 S.E.2d at 75.  Conversely, Defendant had the tube examined and inspected by an independent expert who found no inclusions, cracks, holes, or thin spots.  Id.  The expert confirmed the tube's correct chemical composition and tensile strength, and he offered testimony that the tube was inspected prior to delivery to dealers.  Id.

After reviewing this evidence, the court stated that Plaintiff failed to establish that there was a defect in the tire.  Id. at 234, 182 S.E.2d at 75.  "The burden was on [Plaintiff] to show that the tube was defective and such resulted from the negligent manufacture thereof by the appellant.  The mere fact that the tube exploded does not demonstrate the manufacturer's negligence nor tend to establish that the tube was defective."  Id. (emphasis added).  Viewing the record in the light most favorable to Plaintiff, the court concluded that the only reasonable inference was that Defendant was not guilty of negligence, and the trial judge should have directed a verdict in Defendant's favor.  Id.  The court reversed the trial court and remanded the case for entry of judgment in favor of Defendant.  Id.

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.

Tuesday, February 7, 2012

Case Brief: Deloach v. Whitney, 275 S.C. 543, 273 S.E.2d 768 (1981)

Today's Case Brief is Deloach v. Whitney, 274 S.C. 543, 273 S.E.2d 768 (1981).  It stands for the principle that South Carolina's strict liability statute does not extend to negligent installation of a non-defective product.  It also illustrates the importance of carefully considering the legal theory you use for a case.

FACTUAL BACKGROUND: Plaintiff won four tires in a raffle by Defendant tire company.  275 S.C. at 544, 273 S.E.2d at 769.  Defendant installed the tires.  Id.  During part of the installation, a deteriorated valve stem, which was not part of the tire, was left on the wheel.  Id.  Plaintiff sustained injuries when the valve stem ruptured and he lost control of his car.  Id.

PROCEDURE: Plaintiff sued Defendant and alleged negligence, breach of warranty, and strict liability in tort.  275 S.C. at 544, 273 S.E.2d at 769.  Significantly, Plaintiff withdrew the causes of action for negligence and warranty and proceeded solely on strict liability in tort.  Id.  Defendant moved for a directed verdict at trial on strict liability, and the trial court denied the motion, finding services included within the scope of South Carolina's strict liability statute.  Id.  The sole issue submitted to the jury was whether Defendant was liable under a strict liability theory for failing to install a new valve stem or not warning Plaintiff of the deteriorated condition of the one on the wheel.  Id.  The jury returned a verdict for Defendant.  Id.  Plaintiff moved for a new trial because Defendant's closing argument was improper and prejudicial.  Id.  This motion was granted, and Defendant appealed.  Id. 

ISSUE(S): (1) Whether the trial court's denial of Defendant's motion for directed verdict was erroneous, and (2) whether Plaintiff should have been granted a new trial.  275 S.C. at 544, 273 S.E.2d at 769.

DISPOSITION: The trial court erred in granting a new trial because Defendant was entitled to a directed verdict as a matter of law, and any prejudice from Defendant counsel's closing argument was harmless.  275 S.C. at 545-46, 273 S.E.2d at 769-70.

RULES AND OPINION: Defendant moved for a directed verdict on the issue of strict liability because there had been no "sale" to bring the transaction within S.C. Code § 15-73-10.  275 S.C. at 544-45, 273 S.E.2d at 769.  The statute imposes liability upon sellers of defective, unreasonably dangerous products.  Id. at 545, 273 S.E.2d at 569.  The court refused to expand the statute to include negligent installation of a non-defective product (e.g., the tire).  Id.  The alleged defect was already present when Defendant performed his service.  Id.  Defendant neither supplied nor used a defective product in conjunction with mounting the tires on Plaintiff's car.  Id.  As stated by the court:
The actionable conduct, if any, resulted from his negligence in not examining the value stem.  We conclude this action does come within to scope of § 15-73-10, supra.  We decline to expand the scope of strict liability in South Carolina to include the negligent installation of a non-defective product.
Id.  As a result, the trial court should have directed a verdict, and there was no issue for the jury to decide.  Any prejudice from the closing argument was harmless (and moot).  275 S.C. at 545-46, 273 S.E.2d at 769-70.

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.

Monday, August 22, 2011

New SC Products Liability Case: 5 Star, Inc. v. Ford Motor Co.

Recently, the South Carolina Court of Appeals issued its decision in 5 Star, Inc. v. Ford Motor Company.  You can find the opinion on page 120 here, and also here.  This is a negligent design defect case, and the court basically re-affirms that a negligence theory requires conduct evidence.

FACTUAL BACKGROUND: Plaintiff 5 Star, Inc. (“Plaintiff”) is a lawn maintenance/pressure washing company.  It bought a 1996 Ford F-250 pickup truck in February 2005.  In September 2005, Plaintiff’s owner parked the truck in a warehouse containing tractors, trailers, lawnmowers, and other business equipment.  Upon returning a couple of days later, Plaintiff’s owner discovered a fire had occurred.  Although there were no personal injuries, the truck was destroyed and the building and certain equipment was severely damaged.  Before the lawsuit and before Ford could inspect the truck, Plaintiff’s owner had the truck towed and crushed.

PROCEDURE: Plaintiff filed a products liability action against Ford Motor Co. ("Ford") alleging that negligence in the design of a speed control deactivation switch in the truck caused the fire.  Ford asked the circuit court to dismiss the case as a sanction for spoliation of evidence.  The circuit court declined but instructed the jury that it could draw a negative inference from Plaintiff’s actions.  Ford moved for a directed verdict at the close of Plaintiff’s case and at the end of trial, both of which were denied.  The case was submitted to the jury exclusively on the claim of negligent design.  The jury returned a verdict for $41,000 in actual damages.

ISSUE(S): (1) Whether the circuit court erred in declining to dismiss the action as a sanction for Plaintiff’s spoliation of evidence; (2) whether the circuit court erred in denying Ford’s motion for a directed verdict based on a lack of evidence that Ford was negligent in design of the speed control deactivation switch.

DISPOSITION: The court did not reach the question of whether the circuit court abused its discretion in ruling on the motion to dismiss based on spoliation, citing to Futch v. McAllister Towing of Georgetown, Inc., 335 S.C. 598, 518 S.E.2d 591, 598 (1999) and its recognition that an appellate court need not address remaining issues when resolution of one issue is dispositive.  (See footnote 2).  With regard to denial of Ford’s directed verdict motion, the court reversed the jury verdict and entered judgment in favor of Ford.

RULES AND OPINION: In addition to the three elements common to all products liability claims, a plaintiff asserting a negligent design theory must prove that the defendant manufacturer’s conduct in designing the product breached its duty of due care.  Ford argued on appeal that Plaintiff failed to present such conduct evidence, or to present evidence that the product was in essentially the same condition as when it left the defendant (i.e., one of the three common elements).  (The court did not discuss whether the product was in essentially the same condition for the same reason that it did not address spoliation).

Instead, the court focused on Plaintiff’s failure to present evidence of negligent conduct in the design of the product on or before the time of manufacture.  The court elaborated on how a negligence theory is different in that “’[t]he focus [in a negligence action] is upon the action of the defendant.  The mere fact a product malfunctions does not demonstrate the manufacturer’s negligence.”  Quoting Sunvillas Homeowner’s Ass’n v. Square D Co., 301 S.C. 330, 333, 391 S.E.2d 868, 870 (Ct. App. 1990). 

Ford conceded the switch was defective.  However, Plaintiff was obligated to offer evidence that Ford’s conduct was negligent.  Plaintiff failed to offer any evidence of Ford’s conduct whatsoever.  Neither the City Fire Investigator witness nor Plaintiff’s cause and origin expert testified to any events at or before the manufacture of the truck and switch.  Furthermore, neither witness was qualified as an expert in automotive design or other expertise so as to enable them to offer opinions on whether Ford’s conduct was negligent.  The only other witness who could have provided conduct testimony was a desgn analysis engineer for Ford.  He was qualified as an a vehicle fire cause and origin expert, but he offered no conduct facts/opinions, and Plaintiff's counsel did not ask him any questions relating to Ford's conduct in designing the switch that occurred in 1996 or earlier.

In short, the court held that Plaintiff failed to present expert testimony to prove that Ford was negligent in its design of the switch in 1996.  Therefore, the circuit court erred in not directing a verdict in favor of Ford.  The court distinguished its opinion from the holding in Duncan v. Ford Motor Co., 285 S.C. 119, 128, 682 S.E.2d 877, 881 (Ct. App. 2009) because the plaintiff in Duncan presented expert testimony concerning Ford's conduct.  (See footnote 4). 

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.

Monday, September 13, 2010

SC Supreme Court Issues Substitute Opinion in Watson v. Ford

Today, the South Carolina Supreme Court issued a substitute opinion in the Watson v. Ford Motor Co. case. The re-filed opinion can be found here (first opinion) and here.

I previously briefed this case at this post, so I plan to update it once I have had a chance to digest this re-filed opinion. The re-filed opinion appears to deal with the same issues that were in the first opinion (admission of testimony of two experts and admission of prior incidents). However, it also deals with Ford's motion for judgment notwithstanding the verdict and holds that the trial court erred in denying Ford's motion.

Be sure to check out footnote 4 where the court talks about its recent adoption of the Restatement (Third) approach to design defect cases. Informative footnote? Or more playing footsy with adopting the Restatement (Third) of Products Liability? You decide.

Check back for further analysis of this re-filed opinion.

Tuesday, August 24, 2010

Case Brief: Branham v. Ford Motor Co.

By Brian A. Comer

Below is a case brief of the South Carolina Supreme Court's August 16, 2010 decision in Branham v. Ford Motor Co. (first posted about here). This is not that "brief," but bear in mind that the majority opinion alone is about 25 pages and will probably be the new authority on products liability law in South Carolina for years to come.

FACTUAL BACKGROUND: Cheryl Hale ("Hale") purchased a used 1987 Ford Bronco II 4x2 in June of 1999. The vehicle was manufactured in 1986 and had 137,500 miles on it. On June 17, 2001, Hale was driving with her child in the passenger seat and Plaintiff Jesse Branham, III ("Plaintiff") in the backseat. No one was wearing a seatbelt. Hale turned to the backseat to ask the children to quiet down. When doing this, she veered toward the shoulder of the road and the right wheel left the roadway. She responded by overcorrecting to the left. The overcorrection led to the vehicle rolling over, and Plaintiff was thrown from the vehicle and injured.

PROCEDURE: Plaintiff filed a lawsuit against Ford and Hale in Hampton County. Plaintiff did not seriously pursue the case against Hale. The case against Ford was based on two product liability claims (a defective seatbelt sleeve claim and a "handling and stablility" design defect claim relating to the rollover). Both claims were pursued in negligences and strict liability. The jury awarded the plaintiff $16 million in actual damages and $15 million in punitive damages. Ford appealed the verdict pursuant to Rule 204(b) of the South Carolina Appellate Court Rules.

ISSUES: Ford raised issues on appeal relating to (i) the design defect claim (including whether negligence could survive if the trial court granted a directed verdict on strict liability, as well as the proper test for determining if a product is defective and unreasonably dangerous in a design defect claim), (ii) the admission of post-distribution evidence, evidence of other similar incidents, and use of certain evidence during closing arguments, as well as the format of the verdict form, and (iii) the excessiveness of actual and punitive damages. The Court also addressed the issue of the alignment of the parties.

DISPOSITION: Affirmed in part, reversed in part, and remanded for a new trial.

RULES AND OPINION: Set forth below is a summary of the Court's opinion, providing headings concerning the subject matter and primary holdings in bold-faced type.

Design Defect Claims

First, the Court held that the trial court erred in directing a verdict on Plaintiff's strict liability seatbelt claim, but not on the same claim brought in negligence. At trial, Plaintiff claimed that Ford was negligent in failing to adequately test the seatbelt sleeve, but did not challenge the seatbelt sleeve design. Plaintiff had also brought a companion strict liability claim. The trial court directed a verdict on the strict liablity claim, but not on the negligence claim. Because the two claims have common elements (namely, the requirement that the product be in a defective and unreasonably dangerous condition), Ford argued that the negligence claim should have also been dismissed. The Court agreed: "When an element common to multiple claims is not established, all related claims must fail." Whether or not the manufacturer was at fault -- the additional element required for a products liability claim brought pursuant to a negligence theory -- is not even reached if a plaintiff cannot prove the predicate element of defective and unreasonably dangerous condition of the product. The Court distinguished the Court of Appeals decision in Bragg v. Hi-Ranger on this issue and emphasized that the critical inquiry as to whether one of the claims survives (where the other is dismissed) is the grounds for the dismissal. Significantly, the Court also agreed with Ford's argument that there is no separate "failure to test" claim apart from the duty to design and manufacture a product that is not defective and unreasonably dangerous. If the product is not defective and unreasonably dangerous, then failure to test cannot be a proximate cause of an injury.

With regard to the "handling and stability" design defect claim, the Court did not find error in the trial court's submission of these design defect claims to the jury. In reaching this determination, the Court reviewed certain testimony by Plaintiff's expert Dr. Melvin Richardson, former Ford Vice President Thomas Feaheny, and certain internal Ford documents relied upon by Dr. Richardson. In short, the Court discussed the evolution of the Bronco II's suspension, including competing views by Ford engineers and Ford executives about the different suspension options, including the "MacPherson" suspension and the "Twin I-Beam" suspension. The testimony and evidence related to the stability of the vehicles while using alternative suspensions, how using the different suspension options would affect rollout of new models, how they would impact other features of the vehicle, and the procedures and motivations behind selecting certain suspension options. Dr. Richardson testified that from all of the evidence, the Bronco II was "dangerously unstable" when it was designed and built, and that no improvements were made to correct this defect. After reviewing the evidence that was presented, the Court agreed with the trial judge's determination that Plaintiff presented sufficient evidence of a design defect known to Ford at or prior to the date of manufacture to withstand a directed verdict motion.

Next, the Court disagreed with Ford's contention that Plaintiff failed to provide evidence of a reasonable alternative design pursuant to the risk-utility test, but agreed that South Carolina law requires a risk-utility test in design defect cases (to the exclusion of the consumer expectations test.) The Court reviewed the prior opinions summarizing the two tests in Claytor v. General Motors Corp., 277 S.C. 259, 262, 286 S.E.2d 129, 131 (1982) and Bragg v. Hi-Ranger, 319 S.C. 531, 543, 462 S.E.2d 321, 328 (Ct. App. 1995). [The two tests are summarized here, as stated in Bragg]. After reviewing the prior case law, the Court again reviewed the competing suspension options (summarized above) and believed that Plaintiff's focus on the Macpherson suspension was evidence of feasible alternative design. The Court stated that whether this alternative satisfied the risk-utility test was a jury question, but the evidence itself was sufficent to survive a directed verdict motion. The Court then held that "the exclusive test in a products liability design case is the risk-utility test with its requirement of showing a feasible alternative design." While the consumer expectations test fits well in manufacturing defect cases, the Court agreed with Ford that it is ill-suited in design defect cases. The Court noted that in 1974, South Carolina's Legislature adopted the Restatement (Second) of Torts section 402(A) (1965) and identified its comments as legislative intent in S.C. Code section 15-73-10 through 15-73-30. However, since this adoption, the Court noted that the American Law Institute has published the Restatement (Third) of Torts: Products Liability (1998), and that this edition moved away from the consumer expectations test for design defects, and toward the risk-utility test. The Court stated that it did not believe that the Legislature intended to foreclose court consideration of developments in products liability law. The Court noted that its approval of the risk-utility test in the Claytor case had not prompted a legislative response, and the overwhelming majority of jurisdictions now employ some form of the risk-utility test.

We believe that in design defect cases the risk-utility test provides the best means for analyzing whether a product is designed defectively. Unlike the consumer expectations test, the focus of a risk-utility test centers upon the alleged defectively designed product. The risk-utility test provides objective factors for a trier of fact to analyze when presented with a challenge to a manufacturer's design. Conversely, we find the consumer expectations test and its focus on the consumer ill suited to determine whether a product's design is unreasonably dangerous.
The court reviewed prior cases in which there was an emphasis on showing a feasible alternative design in the context of a risk-utility analysis, including Claytor, Bragg, Kennedy v. Custom Ice Equip. Co., 271 S.C. 171, 176, 246 S.E.2d176, 178 (1978), Sunvillas Homeowners Ass'n v. Square D Co., 301 S.C. 330, 334, 391 S.E.2d 868, 870 (Ct. App. 1990), and Gasque v. Heublein , Inc., 281 S.C. 278, 283, 315 S.E.2d 556, 559 (Ct. App. 1984). [A review of feasible alternative design law preceding Branham v. Ford Motor Co. can be found here]. The Court noted as follows:
The very nature of feasible alternative design evidence entails the manufacturer's decision to employ one design over another. This weighing of costs and benefits attendant to that decision is the essence of the risk-utility test.
The Court then cited to the Restatement (Third) of Torts: Products Liability section 2(b) (1998) and University of South Carolina Professor David Owen's article Toward a Proper Test for Design Defectiveness: "Micro-Balancing" Costs and Benefits, 75 Tex. L. Rev. 1661, 1687 (1997) to support the risk-utility test and reasonable alternative design (as a requirement of same). The Court stated that the core of the risk-utility balancing test is whether a product was made safe enough, but cautioned that it also adhered to its longstanding principle that just because a product can be made safer does not mean that the product is defective and unreasonably dangerous.

Evidentiary Issues Justifying
Reversal and Remand for New Trial

Notwithstanding the sufficiency of the evidence to withstand a directed verdict on the handling and stability design defect claim, the Court reversed and remanded the case for a new trial, citing three reasons.

First, Ford was prejudiced by Plaintiff's unrelenting pursuit of post-distribution evidence on the issue of liability. The Court reviewed South Carolina's requirement that a plaintiff must show the product was in a defective condition "'at the time that it left the hands of the particular seller.'" (quoting Claytor v. Gen. Motors Corp., 277 S.C. 259, 264, 286 S.E.2d 129, 131-32 (1982). Post-distribution evidence is "evidence of facts neither known nor available at the time of distribution." The Court again cited to Restatement (Third) of Torts: Products Liability section 2, cmt. a (1998) to support that assessing liability in a products liability claim requires evaluation of a manufacturer's decision based on what was known or "reasonably attainable" at the time of manufacture.
The use of post-distribution evidence to evaluate a product's design through the lens of hindsight is improper.
The Court reviewed numerous examples of post-distribution evidence emphasized by Plaintiff at trial and through Dr. Richardson to support a higher rollover tendency of the Bronco II t(evidence hat came to light after manufacture). The Court found this evidence to be prejudicial and stated that "the law should encourage manufacturers to continue to improve their products in terms of utility and safety free from prior design decisions judged through the lens of hindsight."

Second, the trial court agreed that admission of certain post-distribution "other incident" evidence was prejudicial to Ford, but also ruled against Ford on certain pre-manufacture "other incident" evidence. The Court surveyed South Carolina's law that similar accidents are admissible if the tend to prove or disprove some fact in dispute. However, the Court noted that it need not even address whether certain post-distribution evidence admitted into evidence was "substantially similar." "The post-manufacture evidence of purported similar incidents was error, even if the 'substantially similar' threshold was met." The Court reiterated that post-manufacture evidence of similar incidents is not admissible to provide liability. The Court then reviewed the pre-manufacture rollover data introduced by Plaintiff with regard to the Bronco II and other vehicles in the same class. The Court disagreed with Ford's contention that the pre-manufacture comparative evidence of rollover accidents violated the "substantially similar" test articulated in Whaley v. CSX Transportation, Inc., 362 S.C. 456, 483, 609 S.E.2d 286, 300 (2005) and revisited in Watson v. Ford Motor Co., Op. No. 26786 (S.C. Sup. Ct. filed Mar. 15, 2010) (Shearouse Adv. Sh. No. 10 at 37). Even though there was no showing that the cause of the other accidents was similar to the Plaintiff's rollover accident, the Court found that the rate of rollover of the Bronco II compared to other vehicles was relevant to whether the Bronco II had an unreasonably dangerous tendency to rollover. The Court was not persuaded by Ford's arguments that many accidents may be attributable to inexperienced or impaired drivers, or that Hale's inattention was the cause of the accident.

Third, Plaintiff's counsel's closing argument was designed to inflame and prejudice the jury. The Court provided six different examples of excerpts from the closing argument that served as examples of its inflammatory and prejudicial content. The Court also noted that much of the argument was based on inadmissible evidence.

Next, in light of the remand for a new trial, (and without addressing whether it was prejudicial to Ford) the Court held that the trial court's requirement that jthe ury apportion liability between Ford and Hale on the verdict form was error. Because the accident occurred in 2001, Ford and Hale were joint tortfeasors, meaning that they were jointly and severably responsible for all damages. Therefore, there could be no apportionment of fault. The Court noted that that it had reaffirmed the applicability of joint and several liability among joint tortfeasors since adopting the doctrine of comparative negligence. The Court further rejected the trial court's rationale that the apportionment was necessary to ensure that any punitive damages award was based on negligence, and not strict liability (for which punitive damages are not recoverable, discussed here).

Excessiveness of Damages Issues Raised by Ford

Next, the Court addressed the jury's award of $16 million in actual damages and $15 million in punitive damages. In light of the remand for a new trial, the Court found it unnecessary to resolve Ford's claim that the actual damages award was grossly excessive.

With regard to punitive damages, the Court found that the issue was properly submitted to the jury, but agreed that the award could not withstand constitutional scrutiny. Because of the new trial, the Court addressed Plaintiff's reliance on "harm to others" in the closing argument. A central theme of the closing argument was that the jury should punish Ford for harming all Bronco II rollover victims. The trial court charged the jury not to punish Ford for other "conduct." The Court found that this charge violated the "harm to others" prohibition because by focusing on conduct, as opposed to harm to Plaintiff, the charge invited the jury to punish Ford for all Bronco rollover deaths and injuries, which is forbidden by Durham v. Vinson, 360 S.C. 639, 653, 602 S.E.2d 760, 767 (2004) and Philip Morris USA v. Williams, 549 U.S. 346, 350, 353 (2007).

With regard to financial data, the Court stated that South Carolina upholds that the wealth of a defendant is a relevant factor in assessing punitive damages. The Court reviewed Plaintiff counsel's focus on extrapolating financial data in such a manner so as to break it down in terms of daily income, hourly income, etc. Although prior opinions have not found abuse of discretion in the admission of per day earnings of a defendant, the Court believed that evidence of "net worth" appears to be the safest harbor and directed that the retrial be confined to such evidence. The Court also found that the Plaintiff's introduction Ford's senior management compensation (including salaries, bonuses, stock options, etc.) to be error and highly prejudicial.

Alignment of Parties

Finally, the Court addressed Ford's claim that the trial court should have realigned Hale as a plaintiff. Although the Court did not find that this issue was preserved for review, it addressed it "in the hope that our speaking to the matter will aid the bench and the bar." The Court reviewed the evidence at trial to support that Hale sat on the plaintiff's side during the trial and only cross examined one witness for Plaintiff (and the sole question to Plaintiff's economic expert was, "How many millions are in a billion?"). The Court concluded that the only bona fide defendant in the case was Ford. The Court reviewed Rule 21 of the South Carolina Rules of Civil Procedure and its federal counterpart, as well as federal and state authority interpreting them. From this review, the Court adopted the rule that trial court's have the authority to realign parties "at any state of the action." It is within the sound discretion of the trial court and will not be disturbged on appeal absent a showing of an abuse of discretion and resulting prejudice.

This post is subject to the DISCLAIMER AND TERMS OF USE of this website.